TEKNOLAC AQUA 2934-10

Alkyd top coat

  • Corrosion protective
  • 1-component
  • Single coat paint
  • Top coat
  • Water-borne

Waterborne alkyd topcoat or single layer coating.

Semimatt waterborne coating for steel constructions.

Fast drying, good weather resistance and excellent early-water resistance. High surface tolerance, active Corrosion pigmented.

Surface preparation

Remove from the surface any contaminants that might be detrimental to surface preparation and coating. Remove also water-soluble salts by using appropriate methods. The surface should be prepared as follows: STEEL SURFACES: Remove mill scale and rust by blast cleaning to preparation grade Sa 2½ (standard ISO 8501-1). Roughening the surface of thin-plate improves the adhesion of the paint to the substrate. OLD PAINTED SURFACES SUITABLE FOR OVERCOATING: Any impurities that might be detrimental to the application of paint (e.g. grease and salts) are to be removed. The surface must be dry and clean. Old, painted surfaces that have exceeded the maximum overcoating time are to be roughened as well. Damaged parts are prepared in accordance with the requirements of the substrate and the maintenance coating.
Solids abt. 40 % by volume
Weight solids abt. 56 % by weight
Volatile organic compound (VOC) abt. 40 g/l
Gloss Semi-matt
Recommended film thickness The recommended maximal film thickness is 60 µm dry film.
Drying time – dust free after 1 h
Drying time – touch dry after 4 h
Drying time - overcoatable Over night
Thinner Water
Clean up Water