TEKNOL 1888 - BASE T

Transparent primer

A water-borne, fast drying and transparent alkyd/acrylic primer that will bring out the natural surface pattern of wood.

Use: Industrial priming of wooden facade boards and prefabricated units for wooden houses. Protects the wood until it is top coated at the building site or in the factory. The top coating should, however, be done as soon as possible, the next summer at the latest. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.

Surface preparation

The surface must be clean and dry. The moisture content of the wood is to be below 20%.

Application

Stir thoroughly before use. The primer can be applied 1 or 2 times, approx. 100 g/m² /layer.

Application conditions

During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 80%.

Storage

Must not freeze. The storage stability is shown on the label. Store in a tightly closed container. The best storage temperature is +10°C - +25°C.
Total mass of solids abt. 270 g/l
Volatile organic compound (VOC) abt. 3 g/l
Tinting system Teknocolor;Teknomix
Drying time - overcoatable approx. 2 h
Thinner Water.
Clean up Water.
Safety markings See safety data sheet. NOTE! Because of the danger of spontaneous combustion, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended.