TEKNOCOAT AQUA 2550-02
Topcoat
- Topcoat
- Topcoat
TEKNOCOAT AQUA 2550-02 is a water-based acrylic topcoat. Use: Wooden laths, panelling and doors indoors. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.
TEKNOCOAT AQUA 2550 topcoat forms a hard surface that withstands abrasion.
Surface preparation
The surface must be clean and dry.
The moisture content of the wood is to be below 20%.
Application
Stir thoroughly before use.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 80%.
The best result is achieved when the temperature of the air is +23°C - +38°C, the relative humidity of the air 50 - 70% and the ventilation is good.
Storage
The storage stability is shown on the label. Store in a tightly closed container. The best storage temperature is +10°C - +25°C.
Must not freeze.
| Solids | abt. 32 % by volume |
|---|---|
| Total mass of solids | abt. 510 g/l |
| Volatile organic compound (VOC) | abt. 50 g/l |
| Gloss | Semi-matt |
| Tinting system | Teknomix |
| Theoretical spreading rate | 10 m²/l (wet film 100 µm, dry film 30 µm) |
| Drying time – dust free | 30 min |
| Drying time – touch dry | 40 min |
| Drying time - overcoatable | 2 h |
| Thinner | Water or TEKNOSOLV 1935. |
| Clean up | Water. |
| Colours | Base paint 1 with limited tintability. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | M1 classification |
| Gloss value | 22-28 |