Water-borne lacquer

  • Topcoat

Polyurethane magnified, water-borne lacquer. Surface treatment of floors, furniture, and other wooden substrates for indoor use.

Surface treatment of floors, furniture and other wooden substrates for indoor use.

Quick drying lacquer that provides a very wearing resistant surface. Adhesion to certain plastic types like PVC. FURNITURE TEST - Field of application: Chairs/beds/shelves: Extra high demands Tables: High demands Less exposed surfaces: Extra high demands

Surface preparation

The surface to be treated must be dry, clean, and free from dust. Previously painted surfaces should be properly mat sanded. The surface should be well smoothed to reduce rising of wood fibres.

Application conditions

Stir thoroughly before use. Should not be applied or left to dry at temperatures below +18°C. For evaluation of ventilation please contact Teknos consultant. Used on dark woods, water-borne lacquers may show less “glow and depth” than solvent-borne lacquers. Wood containing tannin such as oak may result in smoke-tinting. Before final lacquering we recommend test lacquering and tape test.


Protected against frost and not above +30°C. The storage stability is shown on the label. Store in a tightly closed container.

Air or oven drying.
Weight solids abt. 27 % by weight
Volatile organic compound (VOC) abt. 15 g/l
Gloss Matt
Tinting system Teknocolor
Drying time – fit for sanding after 1 h
Drying time – forced drying Min. +40°C/60% RH - stackable: approx. 30 min. - fit for sanding: approx. 45 min.
Thinner If needed the product can be diluted with water.
Clean up Water, TEKNOCLEAN 1949-00.
Colours Max. pigment content of 3% by weight.
Safety markings See safety data sheet.