SATU LAUDESUOJA
Protection for benches in the steam-room
SATU LAUDESUOJA Protection for benches in the steam-room is a colourless and odourless protection containing paraffin oil for wooden surfaces. It forms a dirt and water repellent but breathable coat. SATU LAUDESUOJA emphasizes the natural colour of wood.
Use: Treatment of benches in the steam-rooms of saunas, wooden kitchen table tops etc. Suitable for untreated and previously oil treated wooden surfaces. Can also be used for treating wall and ceiling panels in steam-rooms.
Technical data sheet
Safety data sheet
Other product specific documents
Surface preparation
Clean new surfaces from dust and dirt. Wash previously oiled surfaces with RENSA SAUNA sauna cleaner and rinse thoroughly with water. If the wooden surface has previously been varnished or treated with protection for sauna, the surface must be sanded bare.
Application
Stir thoroughly before use.
Apply to a clean and dry wooden surface 1 to 3 times depending on the absorption properties of the surface. Wipe off excess oil 30 min after the application.
Application conditions
The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +10°C and the relative air humidity below 80%. Good ventilation during the application and drying period quickens the drying process.
Maintenance
The surface can be cleaned by wiping with a neutral (pH 6 - 8) detergent. Detergent and dirt are removed by wiping and/or rinsing the surface with clean water. Use a cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion. Follow the dilution and other instructions of the detergent producer when using detergents.
Storage
Must be stored tightly closed and kept cool. Must not freeze.
| Solids | abt. 100 % by volume |
|---|---|
| Volatile organic compound (VOC) | The product is not included in the EU VOC directive. |
| Density | abt. 1 g/ml |
| Practical spreading rate | Applied once onto a smooth surface: approx. 10 m²/l. |
| Drying time – dust free | 1 h |
| Drying time – dry to use | the following day |
| Clean up | Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use. |
| Colours | Clear. |
| Packages | 0.25 l, 1 l. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | Finnish Key Flag,M1 classification |