AQUATOP 2600-03
Topcoat
- Topcoat
- Topcoat
AQUATOP 2600-03 is a water-borne, quick-drying and weather-resistant topcoat based on acrylic.
Use: Wooden window frames and external doors. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.
Surface preparation
The surface must be clean and dry. The moisture content of the wood is to be below 20%.
TEKNOPOX-KITTI 100 epoxy putty is recommended as priming putty, and a suitable fine filler for intermediate puttying after the priming.
Application
Stir thoroughly before use.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 80%. The best result is achieved when the temperature of the air is +23°C - +38°C, the relative humidity of the air 50 - 70% and the ventilation is good.
Storage
Must not freeze. The best storage temperature is +10°C - +25°C.
| Total mass of solids | abt. 400 g/l |
|---|---|
| Volatile organic compound (VOC) | abt. 31 g/l |
| Gloss | Semi-matt |
| Tinting system | Teknocolor |
| Theoretical spreading rate | approx. 6 m²/l (wet film 150 µm) |
| Drying time – dust free | 30 min |
| Drying time – touch dry | 40 min |
| Drying time - overcoatable | 1 h |
| Thinner | Water. |
| Clean up | Water. |
| Colours | TM-5626/04 white aluminum |
| Safety markings | See safety data sheet. Open the lid of the container carefully in a controlled manner and let the pressure be released slowly. |
| Gloss value | 25-35 |