1. Teknos
  2. Search Results
  3. ALPOCRYL KF 5372-30

ALPOCRYL KF 5372-30

Solvent-based 2C enamel coating for interior use

»
  • 2-component
  • Solvent-borne
  • Topcoat

ALPOCRYL KF 5372 is a particularly fast-drying, solvent-based, scratch-resistant 2C enamel coating with excellent adhesion and high covering power. The coating is very weather-resistant and is also resistant to household chemicals and mechanical stress. The product can also be processed on spraying lines with forced drying.

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip

Application

Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.

Storage

Storage temperature is +5°C - +30°C. Store in a tightly closed container.

For coatings on PVC and metals, please contact our application engineering team. When coating exterior doors, use suitable substrate materials and system structures. Lack of or insufficient weather protection cannot be compensated for by coatings. On MDF boards with a density of below 700 kg/m3 the surface must be pre-isolated with ALPOLAN UNIVERSALGRUND 2420-00. Strengthen the edges or milled grooves with ALPOLAN UNIVERSALGRUND 2420-00. Moisture-resistant wood based materials must be used for rooms with a high moisture exposure (e.g. kitchens, bathrooms etc.). This product should not be used on horizontal surfaces in these areas.
Weight solids abt. 38 % by weight
Volatile organic compound (VOC) abt. 620 g/l
Pot life 10 h (+23 °C)
Mixing ratio 4:1 by volume (comp. A : comp. B)
Hardener Comp. B: UNIPUR 279 1910-99
Tinting system Largo
Theoretical spreading rate 130 g/m²; 7.6 m²/kg
Density abt. 1.12 g/ml
Drying time – dust free after 20 minutes
Drying time – touch dry after 2-3 hours
Drying time – through-dry after 10-14 days
Drying time - overcoatable after 2 hours
Thinner VERDÜNNER 0950-98, VERDÜNNER 1300-98.
Clean up Wash the equipment immediately after use. UNIVERSALREINIGER U 8600-98 or VERDÜNNER 1000-98.
Colours Available in all RAL and NCS-S colours or at your request.
Safety markings See safety data sheet.
Approvals & certificates EN 71-3
Gloss value 30