Solvent-based 2C enamel coating for interior use

  • 2-component
  • Solvent-borne
  • Topcoat

ALPOCRYL DP 5520 is a particularly fast-drying, solvent-based, 2C enamel coating with excellent adhesion and high covering power. The coating is very weather-resistant and can also withstand mechanical stress. ALPOCRYL DP 5520 is characterised by its lower solvent content. The product can also be processed on spraying lines with forced drying.

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip


Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.


Weight solids abt. 50 % by weight
Pot life 3 h (+23 °C)
Mixing ratio 4:1 by volume (comp. A : comp. B)
Hardener Comp. B: UNIPUR 279 1910-99
Theoretical spreading rate 120 g/m²; 8.3 m²/kg
Density abt. 1.26 g/ml
Drying time – dust free after 10 minutes
Drying time – touch dry after 30 minutes
Drying time – through-dry after 10-14 days
Drying time - overcoatable after 2 to max. 48 hours
Thinner VERDÜNNER 1300-98
Clean up Wash the equipment immediately after use. VERDÜNNER 1000-98 or UNIVERSALREINIGER U 8600-98.
Colours Available in all RAL and NCS-S colours or at your request.
Gloss value 40