KORRO AQUA 2741
- Corrosion protective
- Prefabrication primer
KORRO AQUA 2741 is a 1-pack prefabrication primer based on acrylate dispersion.
The paint is used as a temporary protection on blast-cleaned steel.
Use: As a temporary protection on blast-cleaned steel. KORRO AQUA 2741 can be topcoated by many 1-pack and 2-pack paints, such as water-borne acrylate, epoxy and polyurethane paints, solvent-borne epoxy and polyurethane paints, and xylene-dilutable alkyd paints. Approvals: Quality-System Approval (Module D) number EUFI29-19001263-MED and EC Type-Examination Certificate (Module B) number EUFI29-19001166-MED according to Marine Equipment Directive (2014/90/EU).
Technical data sheet
Safety data sheet
Other product specific documents
|Total mass of solids||abt. 650 g/l|
|Theoretical spreading rate||The typical nominal film thickness 20 μm is equivalent to a wet film thickness of 53 μm on a smooth surface. The theoretical spreading rate is then 19 m²/l, see standard EN 10238.|
|Practical spreading rate||In practice, the spreading rate on surfaces prepared by blast-cleaning has been found to be between 10 - 14 m²/l.|
|Drying time – dust free||1 - 3 min (ISO 9117-3:2010)|
|Drying time – touch dry||5 min (ISO 9117-5:2012)|
|Clean up||Water. Cleaning of the equipment: When painting equipment used for application of solvent-borne paints is used for water-borne paints the equipment must be cleaned carefully: 1. Wash with solvent. 2. Wash with washing solvent for water-borne paints, e.g. TEKNOSOLV 6060. 3. Rinse with water. When shifting from water-borne to solvent-borne paints act in reverse order.|
|Colours||Red. Other colours by agreement.|
|Approvals & certificates||Marine Equipment Approval (Module D),Marine Equipment Approval (Module B)|