DRYWOOD OPTIFINISH TR MATT

Water-borne intermediate and topcoat

DRYWOOD OPTIFINISH TR MATT is a water-borne matt translucent industrial intermediate and topcoat for interior and exterior wooden joinery and other wood constructions. The product can also be used as a primer.

DRYWOOD OPTIFINISH TR MATT is a quick drying product with good penetration into the wood and good wet adhesion, high transparency, and excellent colour and gloss retention. The product has high durability, low water-uptake, and excellent water resistance, long lasting elasticity, high blocking resistance, and good scratch resistance. The product has nice filling and leveling properties, is easy to sand, and has good overcoatability properties.

Surface preparation

The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016. Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.

Application

Stir thoroughly before use.

Application conditions

Min. +8°C.

Storage

Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use. Must not freeze.
Solids abt. 33 % by volume
Volatile organic compound (VOC) abt. 15 g/l
Volatile organic compound (VOC) See safety data sheet.
Gloss Matt
Tinting system Teknocolor
Theoretical spreading rate Approx. 6 m²/l at 60 μm dry film thickness.
Drying time – through-dry See KOMO-certificate for drying conditions or min. 48 h at min. +15°C and max. 60% RH at 120 μm dry film thickness.
Thinner Water.
Clean up Water.
Colours Base T (translucent colours). Tintable in almost all translucent colours.
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet.
Approvals & certificates KOMO Certificate BRL 0814 (32998),KOMO Certificate BRL 0817 (33135)