2. ANTISTAIN AQUA 2901-52

ANTISTAIN AQUA 2901-52

Primer for flow coating / dipping

»
  • Water-borne
  • Primer

ANTISTAIN AQUA 2901-52, a water-borne industrial primer for new wood designated for exterior use such as windows and doors.

ANTISTAIN AQUA 2901-52 can be applied by flow coat or dipping. ANTISTAIN AQUA 2901-52 will typically be applied on hardwood, which for non-durable hardwood has been pretreated with a Wood Preservative. Exterior durability of coating systems including ANTISTAIN AQUA 2901-52 is typically documented according to EN 927-2.

ANTISTAIN AQUA 2901-52 reduces surface discoloration caused by tannins in hardwood.

Surface preparation

The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016. Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.

Application conditions

Stir thoroughly before use. Optimum temperature for products and surroundings: +18°C - +22°C. Optimum relative air humidity: Approx. 50%. Wet film range – achieved by 2 x flow coat: 75-100 µm. Due to evaporation, the solid content of the liquid must be adjusted with water regularly.

Storage

Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
Volatile organic compound (VOC) abt. 5 g/l
Tinting system Teknocolor
Theoretical spreading rate 5-7 m²/l
Clean up Water.
Colours White and Antique white.
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet.