RENO GRUND 3300-00
Grain-accentuating alcohol-based 1C parquet primer
- 1-component
- Solvent-borne
- Primer
 
                - 1-component
- Solvent-borne
- Primer
RENO GRUND 3300-00 is an alcohol-based parquet primer with good grain-accentuating properties. The coating is suitable in the renovation sector for isolating stain-forming substances from the wood substrate and is also suitable on woods that are rich in tannins such as oak and exotic wood species. RENO GRUND 3300-00 reduces the tendency to side edge bonding and therefore lowers the risk of the formation of wide joint cracks (block cracks).
Surface preparation
                     Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand 
                 
             Application
                     Stir or shake the product well for several minutes before use, if necessary by machine. 
                 
             Application conditions
                     Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance. 
                 
             Maintenance
Storage
                     Storage temperature is +5°C - +30°C. Store in a tightly closed container. 
                 
             Application methods
                     We recommend priming twice for woods with a high active substance content, herringbone floors and special exotic wood species. When using RENO GRUND 3300 as a primer, always use a separate roller. 
                 
             | Volatile organic compound (VOC) | abt. 697 g/l | 
|---|---|
| Theoretical spreading rate | 125 g/m²; 8 m²/kg | 
| Density | abt. 0.84 g/ml | 
| Drying time – dust free | after 60 minutes | 
| Clean up | Wash the equipment immediately after use. VERDÜNNER 1000-98 or POLITURSPRIT 4100-98. | 
| Colours | Colourless. | 
| Safety markings | See safety data sheet. Do not smoke during the application and keep away from ignition sources. | 
| Approvals & certificates | Swiss environmental label UE II, class F |