RENO GRUND 3300-00

Grain-accentuating alcohol-based 1C parquet primer

  • 1-component
  • Solvent-borne
  • Primer

RENO GRUND 3300-00 is an alcohol-based parquet primer with good grain-accentuating properties. The coating is suitable in the renovation sector for isolating stain-forming substances from the wood substrate and is also suitable on woods that are rich in tannins such as oak and exotic wood species. RENO GRUND 3300-00 reduces the tendency to side edge bonding and therefore lowers the risk of the formation of wide joint cracks (block cracks).

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand

Application

Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.

Maintenance

For further information on products for treating the surfaces of wooden floors and their use please visit www.parkett-verband.ch.

Storage

Storage temperature is +5°C - +30°C. Store in a tightly closed container.

We recommend priming twice for woods with a high active substance content, herringbone floors and special exotic wood species. When using PARKETT RENO GRUND 3300 as a primer, always use a separate roller.
Weight solids abt. 12 % by weight
Volatile organic compound (VOC) abt. 697 g/l
Theoretical spreading rate 125 g/m²; 8 m²/kg
Density abt. 0.84 g/ml
Drying time – dust free after 60 minutes
Drying time - overcoatable after 3 hours
Clean up Wash the equipment immediately after use. VERDÜNNER 1000-98 or POLITURSPRIT 4100-98.
Colours Colourless.
Safety markings See safety data sheet. Do not smoke during the application and keep away from ignition sources.
Approvals & certificates Swiss environmental label UE II, class F