AQUAPRIMER 2900-22
Primer for flow coating / dipping
- Water-borne
- Primer
- Water-borne
- Primer
AQUAPRIMER 2900-22, a water-borne industrial primer for new wood designated for exterior use such as windows and doors.
AQUAPRIMER 2900-22 can be applied by flow coat or dipping. AQUAPRIMER 2900-22 will typically be applied on softwood or hardwood, which for non-durable hardwood and softwood has been pretreated with a Wood Preservative. Exterior durability of coating systems including AQUAPRIMER 2900-22 is typically documented according to EN 927-2.
Technical data sheet
Safety data sheet
Other product specific documents
Surface preparation
The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%.
Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016.
Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.
Application conditions
Stir thoroughly before use.
Optimum temperature for products and surroundings: +18°C - +22°C.
Optimum relative air humidity: Approx. 50%.
Due to evaporation, the solid content of the liquid must be adjusted with water regularly.
Wet film range 75-100 µm.
Storage
Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use.
Application methods
Saturation spray and brush machine application is also possible.
| Volatile organic compound (VOC) | abt. 20 g/l |
|---|---|
| Tinting system | Teknomix;Teknoshade |
| Theoretical spreading rate | 12-13 m²/l |
| Clean up | Water. |
| Colours | Base T (translucent colours). |
| Packages | Available in a range of standard pack sizes. |
| Safety markings | See safety data sheet. |