AQUAFILLER 1100-00
Primer
- Primer
- Primer
Water borne primer based on acrylic. Use: For wooden laths and doors as well as MDF and fibre boards indoors. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.
Dries quickly and it is easy to sand. AQUAFILLER 1100-00 gives a surface that has good filling properties and that can be top coated with water borne paints.
Surface preparation
The surface must be clean and dry.
The moisture content of the wood is to be below 20%.
Application
Stir thoroughly before use.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 80%.
The best result is achieved when the temperature of the air is +23°C - +38°C, the relative humidity of the air 50 - 70% and the ventilation is good.
Storage
The storage stability is shown on the label. Store in a tightly closed container. The best storage temperature is +10°C - +25°C.
Must not freeze.
| Total mass of solids | abt. 720 g/l |
|---|---|
| Volatile organic compound (VOC) | abt. 33 g/l |
| Gloss | Matt |
| Tinting system | Teknocolor |
| Theoretical spreading rate | 8 m²/l (wet film 125 µm, dry film 48 µm) 6 m²/l (wet film 167 µm, dry film 64 µm) |
| Drying time – dust free | 30 min |
| Drying time – touch dry | 40 min |
| Thinner | Water. |
| Clean up | Water. |
| Colours | White. |
| Safety markings | See safety data sheet. |