AQUACOAT 2650-33
One-component topcoat
Water borne enamel for surface treatment of wood, MDF, Masonite and chipboards for interior use. Thixotropic version.
Impact-resistant and tough surface with good non-blocking properties. Good adhesion to primer and substrate. Good surface appearance. Fast drying. Good resistance to water, coffee, and alcohol.
Technical data sheet
Safety data sheet
- AQUACOAT 2650-33_BASE 1_2025-07-10_EU_en
- AQUACOAT 2650-33_BASE 1_2025-07-10_IE_en
- AQUACOAT 2650-33_BASE 1_2025-07-10_MT_en
- AQUACOAT 2650-33_BASE 1_2025-07-10_NI_en
- AQUACOAT 2650-33_BASE 2_2025-07-10_EU_en
- AQUACOAT 2650-33_BASE 2_2025-07-10_IE_en
- AQUACOAT 2650-33_BASE 2_2025-07-10_MT_en
- AQUACOAT 2650-33_BASE 2_2025-07-10_NI_en
- AQUACOAT 2650-33_BASE 3_2025-07-10_EU_en
- AQUACOAT 2650-33_BASE 3_2025-07-10_IE_en
- AQUACOAT 2650-33_BASE 3_2025-07-10_MT_en
- AQUACOAT 2650-33_BASE 3_2025-07-10_NI_en
Surface preparation
The wood must be free from wood dust and contamination.
Application conditions
Certain wood species such as cedar, oak, mahogany, ash, etc. contain water-borne extractives, which can leach through the coating and stain opaque finishes. Please contact our technical department for further information.
Storage
The storage stability is shown on the label. Store in a tightly closed container. Optimum temperature +18°C-+22°C. Must not freeze.
| Volatile organic compound (VOC) | abt. 41 g/l |
|---|---|
| Gloss | Semi-matt |
| Tinting system | Teknocolor |
| Theoretical spreading rate | 8-10 m²/l |
| Drying time – touch dry | 60 min. |
| Drying time – forced drying | +50°C / 50% RH: - touch dry: 20-30 min. - fit for sanding: 30-40 min. |
| Thinner | Water. |
| Clean up | Water, TEKNOCLEAN 1949-00. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |