Surface preparation

Remove all loose matter, dirt and dust with wire-brush, scrubbing brush or scraper. Wash dirty and/or mildewed surfaces with RENSA FACADE facade cleaner. Rinse the surfaces thoroughly with water and allow to dry.


Stir thoroughly before use.

Application conditions

The surface to be treated has to be dry. The moisture content of the wood is to be below 20%. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%. Avoid application in direct sunlight.


Must not freeze.

Volatile organic compound (VOC) The product is not included in the EU VOC directive.
Practical spreading rate Sawn timber: 6 - 8 m²/l. Planed timber: 8 - 12 m²/l.
Thinner Water. Undiluted.
Clean up Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use.
Colours Clear.
Packages 3 l, 10 l.
Safety markings See safety data sheet.
Approvals & certificates Finnish Key Flag