WENODUR STRUKTURLACK 3008-30
Solvent-based 2C top coat for interior use
- 2-component
- Solvent-borne
- Topcoat
WENODUR STRUKTURLACK 3007 / 3008 is a particularly fast-drying, solvent-based, textured 2C top coat with excellent adhesion and high covering power. The coating is very weather-resistant and is also resistant to household chemicals and mechanical stress. Texture types: 3007 coarse texture 3008 fine texture
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil.
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Effect paints should only be applied using air atomisation, e.g. with a flow cup gun or a low-pressure double diaphragm pump.
Please observe the technical data sheet ‘Large-area coatings with effect paints’ (VTM 4126).
| Weight solids | abt. 51 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 566 g/l |
| Pot life | 6 h (+23 °C) |
| Hardener | Comp. B: UNIPUR 279 1910-99 |
| Tinting system | Largo |
| Theoretical spreading rate | 120 g/m²; 8.3 m²/kg |
| Density | abt. 1.14 g/ml |
| Mixing ratio by weight | 5:1 |
| Drying time – dust free | after 40 minutes |
| Drying time – touch dry | after 3 hours |
| Drying time – through-dry | after 10-14 days |
| Thinner | VERDÜNNER 1300-98, VERDÜNNER 0950-98. |
| Clean up | Wash the equipment immediately after use. VERDÜNNER 1000-98 or UNIVERSALREINIGER U 8600-98. |
| Colours | Available in all RAL and NCS-S colours or at your request. |
| Safety markings | See safety data sheet. |
| Gloss value | 30 |