UVILUX SEALER 1456-05
UV Sealer
- Sealer
UV-curing sealer for surface treatment of laminate, solid wood, and porous wooden plates such as chipboard or MDF-plates. Good adhesion to pinewood knots.
Surface treatment of laminate, solid wood and porous wooden plates such as chipboard or MDF-plates. Good adhesion to pinewood knots.
UVILUX SEALER 1456-05 is especially developed as a sealer. Can be used for both pigmented and clear lacquer systems because of the products unique filling properties and wood wetting. Good sandability.
Technical data sheet
Safety data sheet
- UVILUX SEALER 1456-05_TS 15133 SANDING SEALER_2021-01-13_IE_en
- UVILUX SEALER 1456-05_TS 15133 SANDING SEALER_2021-01-13_UK_en
- UVILUX SEALER 1456-05_TS 21033 SMELL FREE CLEAR_2020-08-27_UK_en
- UVILUX SEALER 1456-05_TS 21033 SMELL FREE CLEAR_2022-08-05_EU_en
- UVILUX SEALER 1456-05_TS 21033 SMELL FREE CLEAR_2022-08-05_GB_en
- UVILUX SEALER 1456-05_TS 21033 SMELL FREE CLEAR_2022-08-05_IE_en
- UVILUX SEALER 1456-05_TS 21033 SMELL FREE CLEAR_2022-08-05_MT_en
- UVILUX SEALER 1456-05_TS 21033 SMELL FREE CLEAR_2022-08-05_NI_en
- UVILUX SEALER 1456-05_TS 21184 SMELL FREE CLEAR_2021-11-15_UK_en
- UVILUX SEALER 1456-05_TS 21184 SMELL FREE CLEAR_2022-08-05_EU_en
- UVILUX SEALER 1456-05_TS 21184 SMELL FREE CLEAR_2022-08-05_GB_en
- UVILUX SEALER 1456-05_TS 21184 SMELL FREE CLEAR_2022-08-05_IE_en
- UVILUX SEALER 1456-05_TS 21184 SMELL FREE CLEAR_2022-08-05_MT_en
- UVILUX SEALER 1456-05_TS 21184 SMELL FREE CLEAR_2022-08-05_NI_en
Storage
Should not be exposed to temperatures above +40°C. Should not be exposed to direct sunlight. Must not freeze. The storage stability is shown on the label. Keep containers tightly closed after use.
The sealer cures under UV-radiation.
| Total mass of solids | abt. 1680 g/l |
|---|---|
| Thinner | The product is delivered ready for use. |
| Clean up | TEKNOSOLV 1129-11 |
| Safety markings | See safety data sheet. |