UVILUX PRIMER 1760-00
Surface treatment of wood and furniture parts. May be used on MDF panels sealed with clear UV-sealer such as 1454-6859 or on melamine coated chip boards which have been primed with UVILUX SEALER 1438-5590.
The applied coat is cured with UV-lamps. UVILUX PRIMER 1760 is produced to provide special good flow properties and a special good hiding power by 1-layer treatments.
|Volatile organic compound (VOC)||See Safety Data Sheet.|
|Recommended film thickness||22-28 g/m² with opti-roller on well calibrated parts.|
|Drying time – fully cured||Should not be carried out at belt speeds above 3 m/min. per lamp Ga/Hg (80 w/cm).|
|Thinner||Is delivered ready for use.|
|Clean up||If necessary, the roller may be cleaned with TEKNOSOLV 1129.|