UNIVERSALPRIMER 0216-00
Solvent-based 1C shop-primer for interior and exterior use
- 1-component
- Solvent-borne
- Wash primer
UNIVERSALPRIMER 0216-00 is a solvent-based 1C shop primer for various metal substrates with active corrosion protection.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, sandblast
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Shop-primer, generally universally suitable for subsequent air and oven-curing coatings. Coated surfaces can be welded.
Weldability is based on practical experience, depends on the substrate and the applied layer thickness.
Appropriate suitability tests must be carried out before use.
| Weight solids | abt. 45 % by weight |
|---|---|
| Theoretical spreading rate | 50-100; 7.8 m²/kg |
| Density | abt. 1.168 g/ml |
| Drying time - overcoatable | after 30-45 minutes |
| Thinner | VERDÜNNER 1000-98 |
| Clean up | Wash the equipment immediately after use. VERDÜNNER 1000-98 or UNIVERSALREINIGER U 8600-98. |
| Safety markings | See safety data sheet. |