TREND 12
Interior paint
- Water-borne
- Water-borne
Semi-matt, water-borne acrylate dispersion paint for indoor use.
The paint is suitable for use on new and previously painted concrete, plaster, stopper, brick and building board surfaces. It is suitable for use on wall and ceiling surfaces that are to be resistant to washing and wear. Not to be used on doors, windows or furniture.
Technical data sheet
Other product specific documents
Product colour chart
Surface preparation
Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed.
Application
Steel surfaces are primed with FERREX AQUA Anticorrosive paint. Paint galvanized surfaces with TREND 12. Prime other surfaces with TREND 3 primer. Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray.
Application conditions
The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5 °C and the relative air humidity below 80 %. Good ventilation during the application and drying period quickens the drying process.
Maintenance
The final forming of the paint film takes abt. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the painted surface must be treated with care. The painted surface can be cleaned by light wiping. Use a damp cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion.
Storage
Must not freeze.
| Solids | abt. 39 % by volume |
|---|---|
| Volatile organic compound (VOC) | EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l. |
| Gloss | Semi-matt |
| Tinting system | Teknomix |
| Density | abt. 1.3 g/ml |
| Drying time – dust free | after ½ hour |
| Drying time - overcoatable | after 1 h |
| Thinner | Water. |
| Clean up | Water. Wash the equipment immediately after use with water. |
| Washability and wear resistance | Wear resistance of the painted surface is good. Wet scrub resistance, class 2 according to EN 13300 (ISO 11998). Lasts over 5 000 brushings, SFS 3755. |
| Packages | 18 L |
| Safety markings | See Safety Data Sheet. |
| Approvals & certificates | M1 classification,Finnish Key Flag |
| Gloss value | 10-14 |