TEKNOSTAIN AQUA 1993-02

Primer for flow coating / dipping

  • Water-borne
  • Primer

TEKNOSTAIN AQUA 1993-02 is a translucent water borne industrial primer for new wood designated for interior use. Only for interior use.

TEKNOSTAIN AQUA 1993-02 can be applied by flow coat, dipping, brush machine or brush. TEKNOSTAIN AQUA 1993-02 will typically be applied on softwood.

TEKNOSTAIN AQUA 1993-02 is emphasizing the natural beauty of wood by accentuation of the wood grain, and prepare the surface for the subsequent layer of clear topcoat. TEKNOSTAIN AQUA 1993-02 is available as translucent factory tinted shades, or can be supplied as bases for on-site tinting. TEKNOSTAIN AQUA 1993-02 is a highly versatile, robust and easy to use interior stain for softwood, which typically is used for interior mouldings, wall and ceiling panels.

Surface preparation

The surface to be treated must be dry, clean, and free from dust. The moisture content of the wood should be approx. 13% and should not exceed 15%.

Application

Stir the product homogeneous before use. To be applied in brush machine, flow coat, by dipping or with brush.

Application conditions

Optimum temperature for products and surrounding: +18°C - +22°C. Optimum relative air humidity: Approx. 50%.

Storage

Protected against frost and not above +30°C. Keep containers tightly closed after use. The storage stability is shown on the label.
Weight solids abt. 10 % by weight
Volatile organic compound (VOC) abt. 19 g/l
Tinting system Teknocolor
Theoretical spreading rate Approx. 25 m²/l
Drying time – forced drying +50°C / 50% RH: - dry to handle: 10 min.
Thinner Water.
Clean up Water.
Colours Base T (translucent colours).
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet.