TEKNOPUR 400-800

Elastomeric coating

  • Chemical resistant
  • Immersion resistant
  • 2-component

TEKNOPUR 400-800 is a two-pack solvent-free elastomeric coating. Coating is applied by spraying. TEKNOPUR 400-800 is based on modified polyurea technology.

Intended for use as waterproofing and as a coating for bitumen roofs and concrete structures.

TEKNOPUR 400-800 withstands impacts, hard abrasion, chemicals and constant immersion in water. The Coating yellows due to the effect of UV-light. When a surface with good colour retention is desired, the surface needs to be overcoated with TEKNODUR 0050, 0090 or 0190 polyurethane top coat. The coating is usually applied to 2000 - 3000 µm thickness. Product has CE approval for protection of concrete structures.

Solids abt. 100 % by volume
Total mass of solids abt. 1130 g/l
Volatile organic compound (VOC) abt. 0 g/l
Pot life 10 sec. (+23 °C)
Mixing ratio 1:1 by volume (comp. A : comp. B)
Hardener Comp. A: TEKNOPUR HARDENER 7245
Gloss Gloss
Drying time – touch dry after about 40 sec
Drying time – fit for light traffic after about 5 min
Drying time – fully cured after about 1 d
Clean up TEKNOCLEAN 6496, TEKNOCLEAN 6481
Approvals & certificates CE marking