TEKNOPLAST PRIMER 7-01
- Chemical resistant
- Wear resistant
TEKNOPLAST PRIMER 7-01 is a two-pack solvent-borne epoxy primer with low solvent content.
Used as a priming coat in abrasion and chemical resistant Epoxy Coating Systems. Can also be used for priming zinc, aluminium, thin-plate and acid-proof steel surfaces and as an intermediate coat over zinc epoxy and zinc silicate primers.
The paint is quickly overcoatable and is therefore suited to a fast painting tempo. It is also suitable for application by twin-feed spray. The paint film withstands heavy abrasion, oils, grease, solvents and chemical splashing. When painting at temperatures below +10°C either TEKNOPLAST PRIMER WINTER HARDENER 7399 (data sheet no. 1320) or TEKNOPLAST WINTER HARDENER 7212 (data sheet no. 1317) is to be used. The paint comes up to the specifications of Swedish Standard SSG 1021 paint type GA.
|Total mass of solids||abt. 1100 g/l|
|Volatile organic compound (VOC)||See safety data sheet.|
|Pot life||3 h (+23 °C)|
|Mixing ratio||4:1 by volume (comp. A : comp. B)|
|Hardener||Comp. B: TEKNOPLAST HARDENER|
|Practical spreading rate||The values depend on the application technique, surface conditions, overspray, etc.|
|Drying time – dust free||1 h|
|Drying time – touch dry||4 h|
|Clean up||TEKNOSOLV 9506 or TEKNOSOLV 9530.|
|Safety markings||See safety data sheet.|
|Approvals & certificates||SSG 1021-GA|