TEKNOL 4881 is a water-borne alkyd based primer.
Use: Industrial priming of planed and fine sawn wooden facade boards and prefabricated units for wooden houses. The paint dries quickly and has good covering and adhesion properties. Protects the wood until it is top coated at the building site or in the factory. The top coating should, however, be done as soon as possible, the next summer at the latest. Can be top coated with both dispersion and oil paints. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.
Technical data sheet
The surface must be clean and dry. The moisture content of the wood is to be below 20%.
Stir thoroughly before use.
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%.
Must not freeze. The storage stability is shown on the label. Store in a tightly closed container. The best storage temperature is +10°C - +25°C.
|Solids||abt. 42 % by volume|
|Volatile organic compound (VOC)||abt. 32 g/l|
|Drying time – touch dry||60 min|
|Drying time - overcoatable||24 h|
|Safety markings||See safety data sheet. NOTE! Because of the danger of spontaneous combustion, any waste from the product, spray mist and soiled rags etc. are to be kept in a fire-proof place in air-tight containers. Immersion in water is also recommended.|