TEKNOFLOOR AQUA
Floor paint
- Wear resistant
- 1-component
- Water-borne
- Wear resistant
- 1-component
- Water-borne
Water-borne acrylate based floor paint for indoor use. For new and previously with alkyd or acrylate paint painted concrete and wooden surfaces: floors and stairs, rooms, cellars, storage spaces etc. Finish: semigloss.
Suitable for unpainted and previously with alkyd, urethane alkyd or acrylate paints painted surfaces of concrete and wood: for floors, stairs etc. in dry spaces indoors as well as for rooms, cellars and storage spaces when the surfaces are affected by normal strain. May also be used on concrete surfaces in outdoor spaces, which are protected from weather.
Technical data sheet
Safety data sheet
Other product specific documents
Product colour chart
Surface preparation
Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust.
NEW CONCRETE SURFACES: The concrete must be at least 4 weeks old and well-hardened so that all moisture from casting is bound and the surface dry. The moisture of the concrete must not exceed 97% as relative humidity or 4% by weight (by 54 / BLY 12).
Remove dense laitance from steel trowelled concrete surface by sanding or etching. Sanding is the best method for removing laitance. Brittle and powdery surfaces are sanded until hard ballast layer appears. After sanding the cement dust is vacuumed or brushed away. The surface is etched if sanding can not be performed. Use RENSA ETCHING Etching liquid or diluted hydrochloric acid (1 part hydrochloric acid and 4 parts water). After the etching the floor is rinsed with water and allowed to dry.
OLD CONCRETE SURFACES: Unpainted greasy floors can be cleaned by emulsifying wash. After the emulsifying wash the floor is acid etched if it is covered with laitance. Loose and poorly adherent old paint coats and laitance can be removed by scraping or machine grinding. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or glossy surfaces by sanding and remove the dust.
NEW WOODEN SURFACES: Untreated wooden surface is cleaned and/or sanded even, if required. Sanding dust is removed.
OLD WOODEN SURFACES: Untreated wooden surface is cleaned and/or sanded even, if required. Sanding dust is removed. Remove loose and poorly adherent old paint coats by scraping or machine grinding. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or glossy surfaces by sanding and remove the dust.
FILLING and SMOOTHING: If required, holes and other irregularities can be filled with TEKNOFLOOR-KOVAKITTI Epoxy Putty or a cement-based filler which suits the hardness of the surface. Wooden surfaces are smoothed with putties that are intended for wood.
Application
Stir thoroughly before use. Apply once or twice.
Suitable airless nozzle size 0.015 - 0.019".
Application conditions
The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +10°C and the relative air humidity below 80%. Drying is faster in low air humidity and/or above + 21 °C. Application will be easier if air is humidified and/or temperature is lowered in the working space. Ventilation after the painting will quicken the drying.
Storage
Must not freeze.
| Solids | abt. 31 % by volume |
|---|---|
| Volatile organic compound (VOC) | EU VOC limit value (cat A/i): 140 g/l. The product's VOC: max. 140 g/l. |
| Gloss | Semi-gloss |
| Tinting system | Teknomix |
| Density | abt. 1.2 g/ml |
| Practical spreading rate | 7 - 9 m²/l. |
| Drying time – dust free | 1 h |
| Drying time – fully cured | 7 d |
| Drying time - overcoatable | 4 h |
| Thinner | Water. |
| Clean up | Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use. |
| Colours | Base paints 1 (white) and 3, which can be tinted to obtain the shades in Interior Colour Card. Ready-made shade: T4017. |
| Packages | 0.9 l, 2.7 l, 9 l. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | CE marking,Finnish Key Flag |
| Gloss value | 90- |