Water-borne putty

  • Putty

TEKNOFILL 5700-09 is a water-borne filler for wood.

TEKNOFILL 5700-09 fills holes and forms a surface which can be sanded. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.

Surface preparation

The surface must be clean and dry. The moisture content of the wood is to be below 20%.


Stir thoroughly before use.

Application conditions

During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 80%. The best result is achieved when the temperature of the air is +23°C - +38°C, the relative humidity of the air 50 - 70% and the ventilation is good.


Must not freeze. The best storage temperature is +10°C - +25°C.

TEKNOFILL 5700-09 is intended for application by hand.
Total mass of solids abt. 1300 g/l
Volatile organic compound (VOC) abt. 10 g/l
Theoretical spreading rate 10 m²/l (wet film 100 µm, dry film 65 µm).
Thinner Water or TEKNOSOLV 1935.
Clean up Water or TEKNOSOLV 1935.
Colours White.
Safety markings See safety data sheet.