TEKNOFILL 5700-00
Water-borne putty
- Putty
- Putty
TEKNOFILL 5700-00 is a water-borne filler for wood.
TEKNOFILL 5700-00 fills holes and forms a surface which can be sanded. Before using the product, the manufacturer should be contacted to check the suitability of the product for the object in question.
Surface preparation
The surface must be clean and dry. The moisture content of the wood is to be below 20%.
Application
Stir thoroughly before use.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 80%. The best result is achieved when the temperature of the air is +23°C - +38°C, the relative humidity of the air 50 - 70% and the ventilation is good.
Storage
Must not freeze. The best storage temperature is +10°C - +25°C.
TEKNOFILL 5700-00 is intended to be applied with puttying machine.
| Total mass of solids | abt. 1300 g/l |
|---|---|
| Volatile organic compound (VOC) | abt. 10 g/l |
| Theoretical spreading rate | 10 m²/l (wet film 100 µm, dry film 65 µm). |
| Thinner | Water or TEKNOSOLV 1935. |
| Clean up | Water or TEKNOSOLV 1935. |
| Colours | White. |
| Safety markings | See safety data sheet. |