TEKNOCRAFT AQUA ISOFILLER 9260-00
Water-borne 1C filler for interior and exterior use
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil.
Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
During the application and drying period the temperature of the ambient air, the surface and the product shall be above +15°C and the relative air humidity below 70%.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
Supplied viscosity: 30-35 s DIN 6
Caution: Material is thixotropic!
Adhesion to MDF raw, spruce, beech, oak, Sipo - GT: 0
| Weight solids | abt. 55 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 50 g/l |
| Theoretical spreading rate | 200 g/m²; 5 m²/kg |
| Density | abt. 1.335 g/ml |
| Drying time – dust free | 30 min |
| Drying time – touch dry | 60 min |
| Drying time – through-dry | 24 h |
| Drying time - overcoatable | 2 h (with water-borne topcoat) 12 h (with solvent-borne topcoat) |
| Colours | White. |
| Safety markings | See safety data sheet. |