TEKNOCRAFT AQUA CLEAR 9560-20
Water-borne 2C topcoat for interior use
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil.
Coating removal: Sand, strip
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
| Weight solids | abt. 37 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 69 g/l |
| Pot life | 2-3 h (+23 °C) |
| Mixing ratio | 10:1 by volume (comp. A : comp. B) |
| Hardener | Comp. B: TEKNOCRAFT AQUA HARDENER 9950-99 |
| Theoretical spreading rate | 100 g/m²; 10 m²/kg |
| Density | abt. 1.18 g/ml |
| Drying time – dust free | 60 min |
| Drying time – touch dry | 3-4 h |
| Drying time – through-dry | 16 h |
| Drying time - overcoatable | 12 h |
| Clean up | Wash the equipment immediately after use. |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Gloss value | 20 |