Water-borne lacquer

  • Topcoat

Polyurethane magnified, water-borne lacquer. Surface treatment of floors, furniture, and other wooden substrates for indoor use.

Surface treatment of floors, furniture and other wooden substrates for indoor use.

Quick drying lacquer that provides a very wear resistant surface. Adhesion to certain plastic types like PVC. FURNITURE TEST: Comply with the demands in category 1, 2 and 3. The test of the surface varies with the colour. Separate test for furniture can be ordered.

Surface preparation

The surface should be well smoothed to reduce rising of wood fibres. Previously painted surfaces should be properly mat sanded. The wood must be free from wood dust and contamination.


Stir thoroughly before use.

Application conditions

Should not be applied or left to dry at temperatures below +18°C. For evaluation of ventilation please contact Teknos consultant. Used on dark woods, water-borne lacquers may show less “glow and depth” than solvent-borne lacquers. Wood containing tannin such as oak may result in smoke-tinting. Before final lacquering we recommend test lacquering and tape test.


Protected against frost and not above +30°C. The storage stability is shown on the label. Store in a tightly closed container.

Air- or oven drying.
Solids abt. 38 % by volume
Total mass of solids abt. 400 g/l
Volatile organic compound (VOC) abt. 56 g/l
Gloss Gloss
Drying time – fit for sanding after 1 h
Drying time – forced drying Min. +40°C / 60% RH: - stackable: approx. 45 min. - fit for sanding: approx. 30 min.
Thinner Water.
Clean up Water, TEKNOCLEAN 1949-00.
Safety markings See safety data sheet.