TEKNOCOAT AQUA 1879-03
Water-borne lacquer
- Topcoat
- Topcoat
Polyurethane magnified, water-borne lacquer. Surface treatment of floors, furniture, and other wooden substrates for indoor use.
Surface treatment of floors, furniture and other wooden substrates for indoor use.
Quick drying lacquer that provides a very wear resistant surface. Adhesion to certain plastic types like PVC. FURNITURE TEST: Comply with the demands in category 1, 2 and 3. The test of the surface varies with the colour. Separate test for furniture can be ordered.
Technical data sheet
Safety data sheet
Surface preparation
The surface should be well smoothed to reduce rising of wood fibres. Previously painted surfaces should be properly mat sanded. The wood must be free from wood dust and contamination.
Application
Stir thoroughly before use.
Application conditions
Should not be applied or left to dry at temperatures below +18°C.
For evaluation of ventilation please contact Teknos consultant.
Used on dark woods, water-borne lacquers may show less “glow and depth” than solvent-borne lacquers. Wood containing tannin such as oak may result in smoke-tinting.
Before final lacquering we recommend test lacquering and tape test.
Storage
Protected against frost and not above +30°C. The storage stability is shown on the label. Store in a tightly closed container.
Air- or oven drying.
| Total mass of solids | abt. 422 g/l |
|---|---|
| Weight solids | abt. 40 % by weight |
| Volatile organic compound (VOC) | abt. 55 g/l |
| Gloss | Semi-matt |
| Tinting system | Teknocolor |
| Drying time – fit for sanding | after 1 h |
| Drying time – forced drying | Min. +40°C / 60% RH: - stackable: approx. 45 min. - fit for sanding: approx. 30 min. |
| Thinner | Water. |
| Clean up | Water, TEKNOCLEAN 1949-00. |
| Safety markings | See safety data sheet. |