TEKNOCOAT AQUA 1878-84
One-component topcoat
Water-borne enamel for surface treatment of wood, MDF, Masonite, and chipboards for interior use.
Impact-resistant and tough surface with good non-blocking properties. Good adhesion to primer and substrate. Good surface appearance. Fast drying. Good resistance to water, coffee, and alcohol.
Technical data sheet
Safety data sheet
- TEKNOCOAT AQUA 1878-84_RAL 9010_2022-11-14_EU_en
- TEKNOCOAT AQUA 1878-84_RAL 9010_2022-11-14_GB_en
- TEKNOCOAT AQUA 1878-84_RAL 9010_2022-11-14_IE_en
- TEKNOCOAT AQUA 1878-84_RAL 9010_2022-11-14_MT_en
- TEKNOCOAT AQUA 1878-84_RAL 9010_2022-11-14_NI_en
- TEKNOCOAT AQUA 1878-84_SNOW WHITE_2023-11-27_EU_en
- TEKNOCOAT AQUA 1878-84_SNOW WHITE_2023-11-27_GB_en
- TEKNOCOAT AQUA 1878-84_SNOW WHITE_2023-11-27_IE_en
- TEKNOCOAT AQUA 1878-84_SNOW WHITE_2023-11-27_MT_en
- TEKNOCOAT AQUA 1878-84_SNOW WHITE_2023-11-27_NI_en
- TEKNOCOAT AQUA 1878-84_TS 20174 WHITE_2023-11-02_EU_en
- TEKNOCOAT AQUA 1878-84_TS 20174 WHITE_2023-11-02_GB_en
- TEKNOCOAT AQUA 1878-84_TS 20174 WHITE_2023-11-02_IE_en
- TEKNOCOAT AQUA 1878-84_TS 20174 WHITE_2023-11-02_MT_en
- TEKNOCOAT AQUA 1878-84_TS 20174 WHITE_2023-11-02_NI_en
Surface preparation
The wood must be free from wood dust and contamination.
Application conditions
Certain wood species such as cedar, oak, mahogany, ash, etc. contain water-borne extractives, which can leach through the coating and stain opaque finishes. Please contact our technical department for further information.
Storage
The storage stability is shown on the label. Store in a tightly closed container. Optimum temperature: +18°C - +22°C. Must not freeze.
| Total mass of solids | abt. 600 g/l |
|---|---|
| Volatile organic compound (VOC) | abt. 39 g/l |
| Theoretical spreading rate | 8-10 m²/l |
| Drying time – touch dry | 30 min. |
| Drying time – forced drying | +50°C / 50% RH: - touch dry: 10-15 min. - fit for sanding: 15-20 min. |
| Thinner | Water. |
| Clean up | Water, TEKNOCLEAN 1949-00. |
| Colours | White and white pigmented colours. |
| Safety markings | See safety data sheet. |