TEKNOART 2303-02
1C nitrocellulose coating
- 1-component
- Solvent-borne
- Topcoat
TEKNOART 2303-02 is a 1C nitrocellulose coating that creates high-quality, extremely matt surfaces that prevent any disturbing reflections and optimally accentuate architectural models with filigree structures. With its extremely dull gloss level, TEKNOART 2303 clearly surpasses even the lowest gloss levels of previous products.
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
| Weight solids | abt. 42 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 635 g/l |
| Theoretical spreading rate | 100 g/m²; 10 m²/kg |
| Density | abt. 1.12 g/ml |
| Drying time – dust free | after 10 minutes |
| Drying time – touch dry | after 60 minutes |
| Drying time – through-dry | after 14 hours |
| Drying time - overcoatable | after 3 hours |
| Thinner | OWECELL D 1500-98 |
| Clean up | Wash the equipment immediately after use. OWECELL D 1500-98 |
| Colours | White. |
| Safety markings | See safety data sheet. |
| Gloss value | 2 |