Wallpaper primer

  • Special adhesion
  • Water-borne

Water-borne white acrylate dispersion paint for indoor use. Finish: full-matt.

For priming on new and previously painted concrete, filler and building board surfaces that will be covered with paper, vinyl or fibre based wallpaper, as well as for fastening and priming of fibreglass cloth. Ready-to-use fillers from TEKNOSPRO series or other fillers which don't easily dissolve in water after drying are recommended for surfaces to be wallpapered.

Surface preparation

Clean the surface from dirt and dust. Wash previously painted, dirty surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable stopper from the TEKNOSPRO series. The dried stopper is sanded down and the dust removed.


Before use stir the paint thoroughly. Apply by roller, spray or brush. Recommended nozzle size for airless spray is 0.017 - 0.021".

Application conditions

The surface to be painted must be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5 °C and the relative air humidity below 80 %. Drying is faster in low air humidity and/or above + 21 °C. The surface painted with TAPETTIPOHJAMAALI can be wallpapered and/or top coated under normal conditions the following day.


Must not freeze.
Solids abt. 34 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/a): 30 g/l. The product's VOC: max. 30 g/l.
Gloss Full-matt
Density abt. 1.3 g/ml
Drying time – dust free after ½ h
Thinner Water.
Clean up Wash the equipment immediately after use with detergent and warm water.
Washability and wear resistance Wet scrub resistance, class 2 according to EN 13300 (ISO 11998).
Packages White: 2,7 L, 9 L
Safety markings See Safety Data Sheet.
Approvals & certificates M1 classification,Finnish Key Flag