PENTOL UV PROTECT PLUS 0783-30

Water-soluble light and moisture protection for interior and protected exterior use

  • 1-component
  • Water-borne
  • Coating

PENTOL UV PROTECT PLUS 0783 is an aqueous light and moisture protection product for interior and protected exterior use. Absorbs the UV radiation responsible for the degradation of lignin and therefore delays darkening and greying of the wood. Protection from moisture. The hydrophobic effect reduces swelling and shrinkage of the wood. Especially suitable for lighter-coloured softwood species such as spruce, fir and pine.

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand

Application

Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.

Storage

Storage temperature is +5°C - +30°C. Store in a tightly closed container.

Do not sand surfaces treated with UV protection, as this will destroy the UV protection. Technical requirement: Adhesive strength according to DIN EN ISO 2409; Gt 0.
Weight solids abt. 31 % by weight
Volatile organic compound (VOC) abt. 31 g/l
Tinting system Largo
Theoretical spreading rate 80 g/m²; 12.5 m²/kg
Density abt. 1.03 g/ml
Drying time – dust free after 60 minutes
Drying time - overcoatable after 6 hours
Clean up Wash the equipment immediately after use. Water, VERDÜNNER 1300-98.
Colours Colourless.
Safety markings See safety data sheet.
Gloss value 30