PENTO FLUID CLASSIC 2127-20
Glazing, water-soluble coating for pre-greying of facades
- 1-component
- Water-borne
- Coating
PENTO FLUID CLASSIC 2127 is a glazing, water-soluble and weather-resistant wood coating. It is an open-pore thin-layer system with a modern formulation based on natural raw materials. Designed for manual processing, in some cases suitable for industrial application. The emulsion penetrates deep into the wood and provides long-lasting protection against moisture and dimensional changes. As with the other products in the PENTO FLUID family, maintenance coats are required at much longer intervals than with conventional facade treatments. Application is simple as the system is not film-forming.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
When using for red cedar please contact our application engineering team.
The product only accelerates wood greying and the shade can vary depending on the wood species. We recommend testing the product on a sample of the original wood, taking the application method into account.
| Weight solids | abt. 41 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 15 g/l |
| Tinting system | Largo |
| Theoretical spreading rate | 100 g/m²; 10 m²/kg |
| Density | abt. 1 g/ml |
| Drying time – dust free | after 6 hours |
| Drying time – through-dry | after 3 days |
| Drying time - overcoatable | after 24 hours |
| Clean up | Wash the equipment immediately after use. Water, VERDÜNNER 1300-98. |
| Colours | Translucent. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | Swiss environmental label UE V, class C |
| Gloss value | 20 |