Panel Varnish

  • UV resistant
  • Water-borne
  • Varnish

PANEELILAKKA Panel Varnish is a water-based nearly odourless dispersion varnish that contains agents that protect against ultraviolet light.

Especially suitable for varnishing panelled walls and ceilings. Is also suitable for use on chipboard walls and ceilings. The varnish is not recommended for floors, parquets or furniture.

Technical data sheet

Surface preparation

Remove grease and dirt. Matt down old, intact varnished surface by sanding. If the varnished surface is flaking, remove it by sanding.


Stir the varnish carefully down to the bottom of the can. Apply the varnish twice along the direction of the wood grain. After the first application the surface can be lightly sanded to remove uplifted wood fibers. For the first application the varnish can be diluted with water. The second application is done with undiluted varnish.

Application conditions

During the varnishing and drying period the temperature of the ambient air, the surface and the varnish shall be above +10 °C and the relative air humidity below 80 %.


Must not freeze.
Solids abt. 33 % by volume
Volatile organic compound (VOC) EU VOC limit value (kat A/e): 130 g/l 2010. The product's VOC: max. 130 g/l.
Gloss Semi-matt
Tinting system Teknomix
Drying time – dust free after ½ hour
Thinner Water.
Clean up Wash the equipment immediately after use with detergent and warm water.
Safety markings See Safety Data Sheet.
Approvals & certificates Finnish Key Flag
Gloss value 18-24