OWOGRIP 4374-10

Solvent-based, textured 2C top coat for interior use

  • 2-component
  • Solvent-borne
  • Primer
  • Topcoat

OWOGRIP 4374 is a solvent-based, textured 2C top coat with excellent filling properties. The product has a high elasticity and is resistant to mechanical stress. The coating is ring resistant and is highly resistant to metal abrasion.

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, strip


Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.


Storage temperature is +5°C - +30°C. Store in a tightly closed container.

Effect paints should only be applied using air atomisation, e.g. with a gravity feed gun or a low-pressure double membrane pump. Please take note of the technical data sheet "Large-area coatings with effect paints" (VTM 4126).
Weight solids abt. 51 % by weight
Volatile organic compound (VOC) abt. 494 g/l
Pot life 3 h (+23 °C)
Hardener Comp. B: OWEDUR 5093-99
Tinting system Largo
Theoretical spreading rate 200-250 g/m²; 4.4 m²/kg
Density abt. 1.16 g/ml
Mixing ratio by weight 2:1
Drying time – dust free after 20 minutes
Drying time – touch dry after 90 minutes
Drying time – through-dry after 10-14 days
Thinner OWEDUR 5046-98
Clean up Wash the equipment immediately after use. OWEDUR 5046-98
Colours Available in all RAL and NCS-S colours or at your request.
Safety markings See safety data sheet.
Gloss value 10