Cleaning agent

  • Detergent

Cleaning agent in the form of concentrate. Medium viscous, yellowish, clear liquid, a mixture of mild alkaline and emulsifiers. Is biodegradable, non-flammable and non-toxic. Does not cause corrosion. Soluble in water in all proportions. It has very good washing properties beginning at 1% concentration. It creates foam.

It may be used in the full range of concentrations. For cleaning of metal surfaces before anticorrosive protection work the most commonly used are 1 - 20% aqueous solutions. The concentrate may be only in the case of thick layers of dirt or sticky and difficult to volatile fatty or petroleum products. For cleaning the surface of zinc and aluminum solutions should only be used (contact the surface of the solution should not be longer than 10min.). Use at temperatures above 0°C.


Solutions of cleaning agent can be applied either by hand using a brush, as well as by means of a spray. After application, allow it to penetrate the surface contamination at approximately 10 - 15 minutes, and then rinse with clean water. Increasing the temperature of the solution (to 80 °C) improves the efficiency and speed of cleaning and reduces the concentrations used.
Packages 1 l
Safety markings See Safety Data Sheet