TEKNOFLOOR AQUA NATURE PRIMER 4538-00
Water-borne, lightening 1C parquet primer
- 1-component
- Water-borne
- Primer
- 1-component
- Water-borne
- Primer
TEKNOFLOOR AQUA NATURE PRIMER 4538-00 is a water-borne, highly elastic parquet primer that does not accentuate the grain. For perfect floor sealing on a completely aqueous basis. The product is mainly designed for use on light woods, also suitable for natural oak. Reduces the tendency for side edge bonding and therefore lowers the risk of the formation of wide joint cracks (block cracks).
Technical data sheet
Safety data sheet
- TEKNOFLOOR AQUA NATURE PRIMER 4538-00_FARBLOS-INCOLORE-COLOURLESS_2026-10-29_EU_en
- TEKNOFLOOR AQUA NATURE PRIMER 4538-00_FARBLOS-INCOLORE-COLOURLESS_2026-10-29_IE_en
- TEKNOFLOOR AQUA NATURE PRIMER 4538-00_FARBLOS-INCOLORE-COLOURLESS_2026-10-29_MT_en
- TEKNOFLOOR AQUA NATURE PRIMER 4538-00_FARBLOS-INCOLORE-COLOURLESS_2026-10-29_NI_en
Other product specific documents
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.
Storage
Storage temperature is +5°C - +30°C. Store in a tightly closed container.
For renovation, fumed oak and exotic wood species we recommend using TEKNOFLOOR RENO PRIMER NORDIC 3338-00 instead of TEKNOFLOOR AQUA NATURE PRIMER 4538-00 for more effective isolation of the substrate. When using TEKNOFLOOR AQUA NATURE PRIMER 4538-00 as a primer, always use a separate roller.
TEKNOFLOOR AQUA NATURE PRIMER 4538-00 and parquet sealing coatings are not compatible with one another in a liquid state. Coagulates occur during mixing.
| Weight solids | abt. 30 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 78 g/l |
| Theoretical spreading rate | 125 g/m²; 8 m²/kg |
| Density | abt. 1.03 g/ml |
| Drying time – dust free | 60 min |
| Drying time - overcoatable | 4 h |
| Clean up | Wash the equipment immediately after use. Water, VERDÜNNER 1000-98. |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | M1 classification,Swiss environmental label UE II, class C |