INFRALIT PE 8928-07
Polyester powder
- Powder coating
- Powder coating
INFRALIT PE 8928-07 is a TGIC-free powder coating based on solid polyester resin. At elevated temperature the powder will melt, cure and form the final paint film.
Suitable for objects which require a weather-resistant coating, especially for coating of aluminium objects. INFRALIT PE 8928-07 forms a mechanically and chemically resistant paint film which has good corrosion resistance and good colour stability and gloss retention also in outdoor conditions. INFRALIT PE 8928-07 is a bonded metallic or pearlescent colour. APPROVALS: GSB material approval. Registration number 146c, Cl. ”Florida 1 year”. Qualicoat approval number P-0515, Cat. 1, Cl. 1. The product has been classified to Group M1 in Emission Classification of building materials. Quality-System Approval (Module D) number EUFI29-22005225-MED and EC Type-Examination Certificate (Module B) number EUFI29-19003427-MED according to Marine Equipment Directive (2014/90/EU). EN 45545-2:2013+A1:2015 Fire protection on railway vehicles. Requirement sets R1, R7, R10 & R17 - Hazard levels HL1, HL2 & HL3. NFPA 130:2020 Standard for Fixed Guideway Transit and Passenger Rail Systems, Chapter 8 - Vehicles - ASTM E 162:2016 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source - ASTM E 662:2017 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
Technical data sheet
Safety data sheet
Other product specific documents
- More than meets the eye - Architectural powder coatings
- Declaration of Conformity_Marine Equipment Directive 2014/90/EU_INFRALIT PE 8928.pdf
- EN 45545-2 Declaration of Conformity
- INFRALIT PE 8928 Qualicoat Class 1 approval_2025.pdf
- INFRALIT-PE-8928-GSB-material-licence-146 c-until-30_06-2027.pdf
- MED_Module B_INFRALIT PE 8928
Surface preparation
Storage
| Practical spreading rate | 6 - 10 m²/kg depending on the film thickness. |
|---|---|
| Spraying | TRIBO/CORONA |
| Curing time | 15-25 min/180°C (metal temperature) |
| Colours | The most common shades according to RAL-CLASSIC Colour Card available directly from stock. Other shades by agreement. |
| Packages | 15 kg or 20 kg according to the density of the powder. |
| Safety markings | See safety data sheet. The powder itself is non-flammable, but with air it can form an explosive mixture that in presence of adequate ignition energy ignites. The lower explosion limit of typical powder coatings is between 20 g/m³ and 80 g/m³ (CEPE, Safe Powder Coating Guideline 8th Edition, 2020). Ventilation of the spray booth should be adjusted so that the concentration of powder in the air is less than 50% of the lower explosive limit value. On calculation of the powder concentration in the spray booth, the powder deposited on the workpiece is not taken into account. In order to avoid the discharge of powder from the booth into adjacent working spaces, the speed of air flow in the apertures of the booth must not fall below 0.5 m/s. Spray painters should wear dust masks and protective gloves. Any spatter of powder on the skin should be washed off with water and soap. |
| Approvals & certificates | ASTM E 662:2017,ASTM E 162:2016,EN 45545-2,GSB Florida 1 approval,M1 classification,Marine Equipment Approval (Module D),Marine Equipment Approval (Module B),Qualicoat approval, class 1 |
| Gloss value | 23-33 |