INFRALIT EP 8026-05
Zinc epoxy powder
- Corrosion protective
- Powder coating
INFRALIT EP 8026-05 is a powder coating based on epoxy resin containing metallic zinc, which has very good anticorrosive properties. At elevated temperature the powder melts, cures and forms the final paint film.
INFRALIT EP 8026-05 is mainly suitable for use on steel surfaces blast-cleaned to preparation grade Sa 2½, when the constructions will be exposed to severely corrosive environments.
INFRALIT EP 8026-05 forms a mechanically resistant paint film that has good anticorrosive properties. The surface can be overcoated with INFRALIT Powder Coating or some other suitable paint. Overbaking of INFRALIT EP 8026-05 powder coating must be avoided when overcoating. If the stoving temperature of the primer is higher than 205°C, the adhesion between the coats may be diminished. We recommend that intercoat adhesion is checked when direct fired gas oven is used in two layer painting.
|Recommended film thickness||abt. 60 µm above the peaks of the surface profile|
|Curing time||10 min/180°C (metal temperature)|