HARTÖL 6448-15

Solvent-based, oxidatively drying oil for the industrial surface treatment of wood substrates for interior use

Surface preparation

Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand

Application

Stir or shake the product well for several minutes before use, if necessary by machine.

Application conditions

Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.

Maintenance

Parquet floors: Maintenance: After at least 3 weeks curing time with RENSA WOOD OIL POLISH 4584-00. Re-impregnate with RENSA WOOD CARE OIL 1413. Carpenter application: Maintenance: After a minimum period of 3 weeks by wiping surfaces with a damp cloth (not wet). As required, e.g. weekly, add approx. 1% RENSA WOOD OIL POLISH 4584-00 to the cleaning water (2 caps to 1l of water). Cleans and nourishes the oiled surface. Re-impregnate with RENSA WOOD CARE OIL 1413. For further information on products for treating the surfaces of wooden floors and their use please visit www.parkett-verband.ch

Storage

Storage temperature is +5°C - +30°C. Store in a tightly closed container.

Hazard warning: Pads and cloths soaked in oil can spontaneously combust under certain conditions and should therefore be kept in a metal bin with a lid until they are disposed of correctly.
Weight solids abt. 93 % by weight
Density abt. 0.93 g/ml
Drying time - overcoatable after 4 hours
Clean up Wash the equipment immediately after use. TERPENTINERSATZ 4214-98
Colours Colourless.
Safety markings See safety data sheet.
Gloss value 15