FEYSTAR AQUA 6600-15
Water-borne 2C sealing coating for floor coverings made of wood, cork, linoleum and PVC
- 2-component
- Water-borne
- Sealer
- 2-component
- Water-borne
- Sealer
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C. Ideal surface and object temperature for application: +18°C-22°C. Avoid application in direct sunlight. Underfloor heating systems must be adjusted well in advance.
Maintenance
Initial and maintenance care: After at least 3 weeks curing time with RENSA FLOOR POLISH 4580.
For more information on wood floor surface treatments and their use, visit www.parkett-verband.ch.
Storage
Storage temperature is +5°C - +30°C.
For smoked oak and exotic woods, we recommend the use of our products TEKNOFLOOR KORUND 4500 with RENO GRUND 3300 for better insulation of the substrate (crazing).
For renovations of light-coloured woods, we recommend the use of RENO GRUND 3300 or RENO GRUND NORDIC 3338 for better insulation of the substrate.
Do not use on pear wood without a primer. Risk of film formation faults.
When using on dark woods please refer to the instructions in our VTM 5564 "White discolouration” in the areas around the joints of sealed dark wood floors.
| Weight solids | abt. 30 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 76 g/l |
| Pot life | 2-3 h (+23 °C) |
| Hardener | Mix in hardener mechanically for several minutes. Comp. B: TEKNOFLOOR AQUA HARDENER 4545-99 |
| Theoretical spreading rate | 120 g/m²; 8.3 m²/kg |
| Density | abt. 1.03 g/ml |
| Mixing ratio by weight | 10:1 |
| Drying time – dust free | after 2 hours |
| Drying time – through-dry | after 7 days |
| Drying time - overcoatable | after 4 hours |
| Clean up | Wash the equipment immediately after use. VERDÜNNER 1000-98 or OWEDUR 3502-98. |
| Colours | Colourless. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | EMICODE EC 1 Plus,EN 71-3,Swiss environmental label UE II, class C |
| Gloss value | 15 |