ETERNO 3602-30
Glazing, water-soluble coating for decorative treatment of facades
- 1-component
- Water-borne
- Coating
ETERNO 3602 is a glazing, water-soluble and weather-resistant wood coating with good block resistance. ETERNO 3602 is a double-layer medium-coat system based on the latest highly cross-linking raw materials. Designed for industrial and manual application. Treatment of wooden surfaces with ETERNO 3602 prevents soiling. The low-emission coating does not release substances such as formaldehyde, monomers or other irritant substances. ETERNO 3602 has a good levelling effect and therefore a low stain-forming tendency.
Technical data sheet
Surface preparation
Every substrate must be well-cleaned, dry and free from grease and oil. Coating removal: Sand, sandblast
Application
Stir or shake the product well for several minutes before use, if necessary by machine.
Application conditions
Recommended temperature for surroundings and product: +15°C-25°C. Do not apply below +10°C.
Storage
Storage temperature is +5°C - +30°C.
| Weight solids | abt. 57 % by weight |
|---|---|
| Volatile organic compound (VOC) | abt. 24 g/l |
| Tinting system | Largo |
| Theoretical spreading rate | 80-120 g/m²; 10 m²/kg |
| Density | abt. 1.11 g/ml |
| Drying time – dust free | after 60 minutes |
| Drying time – through-dry | after 24 hours |
| Drying time - overcoatable | after 12 hours |
| Thinner | SPEZIALVERDÜNNER 1020-98 |
| Clean up | Wash the equipment immediately after use. |
| Colours | Translucent. |
| Safety markings | See safety data sheet. |
| Gloss value | 30 |