EKORA 7
Interior paint
- Water-borne
- Water-borne
Water-borne, matt acrylate dispersion paint for interior use.
The paint is used on interior walls and ceilings, e.g. in apartments and offices. EKORA 7 can be applied to wood, concrete, plaster, filler, brick and on to various building boards. It is easy to apply and gives a smooth, matt surface with attractive appearance.
Technical data sheet
Safety data sheet
Product colour chart
Surface preparation
Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed.
Application
Stir thoroughly before use. Apply once or twice.
Application conditions
The surface to be treated must be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative air humidity below 80%.
Good ventilation during the application and drying period quickens the drying process.
Maintenance
The final forming of the film takes approx. 4 weeks under normal circumstances and after that the ultimate durability and hardness is reached. Before this the surface must be treated with care.
The surface can be cleaned by wiping with a neutral (pH 6 - 8) detergent. Detergent and dirt are removed by wiping and/or rinsing the surface with clean water. Use a cleaning cloth, soft sponge or similar for cleaning. Avoid coarse brushing or heavy abrasion. Follow the dilution and other instructions of the detergent producer when using detergents.
Storage
Must not freeze.
| Solids | abt. 40 % by volume |
|---|---|
| Volatile organic compound (VOC) | EU VOC limit value (cat A/a): 30 g/l. The product's VOC: max. 30 g/l. |
| Gloss | Matt |
| Tinting system | Teknomix |
| Density | abt. 1.3 g/ml |
| Practical spreading rate | Previously painted surface: 10 - 12 m²/l. Filler and wood fibre board: 7 - 10 m²/l. Concrete and plastered surface: 4 - 7 m²/l. |
| Drying time – dust free | ½ h |
| Drying time - overcoatable | 1 h |
| Thinner | Water. |
| Clean up | Warm water and RENSA BRUSH brush cleaner. Wash the equipment immediately after use. |
| Colours | Base paints 1 (white) and 3, which can be tinted to obtain the shades in Interior Colour Card. Ready-made shades: Off-white T1724 (T1327). NCS-0501G78Y |
| Packages | Base paints 1 and 3: 4.5 l, 9 l, 18 l. Off-white T1724 (T1327) and NCS-0501G78Y: 18 l. |
| Safety markings | See safety data sheet. CHEMICAL PROPERTIES AND SAFETY The product is not classified as hazardous according to Regulation (EC) 1272/2008. Recommended safety precautions when using the product: Avoid unnecessary skin contact. Use work clothes to protect against paint splashes. Use eye protection to protect againts paint splashes. During spray application avoid breathing spray mist. Use respirator, filter type A P. More information and Safety data sheet: Product's product page www.teknos.com |
| Approvals & certificates | Finnish Key Flag,M1 classification,Nordic Ecolabel |
| Gloss value | 6- 8 |