DRYWOOD OPTIFINISH TR SG
Water-borne intermediate and topcoat
DRYWOOD OPTIFINISH TR SG is a water-borne semi-gloss translucent industrial intermediate and topcoat for interior and exterior wooden joinery and other wood constructions. The product can also be used as a primer.
DRYWOOD OPTIFINISH TR SG is a quick drying product with good penetration into the wood and good wet adhesion, high transparency, and excellent colour and gloss retention. The product has high durability, low water-uptake, and excellent water resistance, long lasting elasticity, high blocking resistance, and good scratch resistance. The product has nice filling and leveling properties, is easy to sand, and has good overcoatability properties.
Technical data sheet
Surface preparation
The wood must be free from wood dust and contamination. The moisture content of the wood should be approx. 13% and should not exceed 15%. Pretreatment is required for wood substrates not meeting Durability Class 3, EN 350:2016.
Teknos has a range of preservative products meeting the requirements of EN 599-1, please contact Teknos for further guidance.
Application
Stir thoroughly before use.
Application conditions
Min. +8°C.
Storage
Storage temperature is +5°C - +30°C. Shelf life in unopened containers: See “Best before date” on the label. Keep containers tightly closed after use. Must not freeze.
| Solids | abt. 33 % by volume |
|---|---|
| Volatile organic compound (VOC) | abt. 18 g/l |
| Gloss | Semi-gloss |
| Tinting system | Teknocolor |
| Theoretical spreading rate | Approx. 6 m²/l at 60 µm dry film thickness. |
| Drying time – through-dry | See KOMO-certificate for drying conditions or min. 48 h at min. +15°C and max. 60% RH at 120 μm dry film thickness. |
| Drying time - overcoatable | Min. 4 h. With drying times longer than one week, light sanding is necessary before a next layer can be applied. |
| Thinner | Water. |
| Clean up | Water. |
| Colours | Tintable in almost all translucent colours. Base T (translucent colours). |
| Packages | Available in a range of standard pack sizes. |
| Safety markings | See safety data sheet. |
| Approvals & certificates | KOMO Certificate BRL 0814 (32998),KOMO Certificate BRL 0817 (33135) |