DRYWOOD OPTIFINISH G

Water-borne topcoat, primer and intermediate

  • Low-temperature curing
  • Water resistant
  • Water-borne
  • Intermediate
  • Primer
  • Topcoat

DRYWOOD Optifinish G, a water-borne industrial primer, intermediate and topcoat (spray quality) for new interior and exterior wooden joinery and other wooden constructions. DRYWOOD Optifinish G can be used as semi-matt industrial intermediate system within Concept II (BRL0817) and as primer system within Concept I (BRL0814).

Drywood Optifinish G 051003-00 can be applied by Airmix (aircoat) or airless by hand or in automatic spraying equipment. Drywood Optifinish G 051003-00 will typically be applied on (pre-treated) substrates such as softwood, hardwood, Accoya and modified wood. All softwood and non-durable hardwood for exterior use should be treated with a wood preservative. When re-coating / re-treating an intermediate sanding must be carried out. Use Drywood Optifinish as a primer/intermediate on Accoya. Exterior durability of coating systems including Drywood Optifinish G 051003-00 is typically documented according to BRL0814/0817.

DRYWOOD Optifinish G is a quick drying product, has a good adhesion, high durability, very low water uptake, good elasticity and gloss retention. The product has nice filling and leveling properties, is easy to sand and has good paintability. It has also good blocking properties, surface hardness and scratch resistance.

Surface preparation

The surface to be treated must be dry, clean, and free from dust.

Application

Stir thoroughly before use.

Application conditions

At a temperature of minimum 15°C.

Storage

Shelf-life is at least 24 months in unopened and closed packaging. Keep containers tightly closed after use. Must not freeze.
Volatile organic compound (VOC) See safety data sheet.
Gloss Semi-matt
Theoretical spreading rate Approx. 8 m²/l at 50 µm dry film thickness.
Drying time – through-dry See KOMO-certificate for drying conditions or min. 48 h at min. 15°C and max. 60% RH at 100 μm dry film thickness.
Drying time - overcoatable With drying times longer than one week, light sanding is necessary before a next layer can be applied.
Thinner Water.
Clean up Water.
Colours Base 1 and base 3 (white and opaque colours). In almost any opaque colour.
Packages Available in a range of standard pack sizes.
Safety markings See safety data sheet.
Approvals & certificates KOMO Certificate BRL 0814 (32998) and BRL 0817 (33135)